Starlink not working? Live outage status & reports
No reports in the last 24 hours.
Starlink current status
No recent reports
0 reports in the last 24 hours.
This does not confirm that Starlink is working.
Official website check: starlink.com is reachable (HTTP 200) · 213 ms · measured (27 minutes ago) This does not confirm the network.
Status calculated automatically from user reports (unofficial) — How it works? · Checked at
Having problems?
Help others by reporting if Starlink isn't working for you.
Is it just you? Pick your problem
Create a support ticket here.: Create a Starlink support ticket
Official status No official status page from Starlink was found. Use the live reports above and the help below.
📈 24h trend
0 reportsHours in UTC
🗺️ Where Starlink is having problems
live0 reports (24h)
No active reports right now.
Starlink is down or not working
Official instructionsStarlink internet keeps dropping or is slow
Scope: Starlink home internet and Starlink kits on the go, including Starlink Mini
Work through these Starlink checks in order when your connection drops, your speed fluctuates or you get brief outages.
- In the Starlink app, check that Wi-Fi is set up under Settings > Router > Networks.
- Split the 2.4 GHz and 5 GHz Wi-Fi bands if they are not already split.
- Connect high-bandwidth devices, such as 4K smart TVs, gaming consoles and computers, to the 5 GHz band, and other devices to the 2.4 GHz band.
- Don't put every device on 5 GHz: spread your devices across both bands, or limit how many devices connect.
- Place the router in a central, open spot, away from walls, metal and other interference.
- In the app, review the connected devices and disconnect the ones you don't use.
- Connect to your Starlink Wi-Fi network and open the Starlink app to look for alerts. If you can't connect to the Starlink Wi-Fi network, go on to the weather check.
- If the app shows an alert, follow the action for that alert in "What your Starlink app alert means and what to do".
- Check the current and recent weather: heavy rain, snow, storms or high wind can cause a brief outage.
- Check that your Starlink has a clear view of the sky. A partial view is often enough, but a tree branch, a pole or a roof that stays in the field of view can interrupt service.
- For the best performance, keep the field of view clear of trees, buildings, poles and debris, including debris on the dish.
- If you moved your Starlink recently, confirm it is in a clear location, mounted firmly and oriented correctly.
- Check the outage history in the app for a pattern.
- Unplug the Starlink cable from the power outlet.
- Check the cable and pins for damage, kinks or exposure to weather.
- Plug the cable back in.
- If you use an Ethernet adapter or an extension, check those connections.
- If another port is available, unplug the cable and plug it into a different port. Use only official Starlink cables: third-party equipment is not covered by the warranty.
Bad weather
When: Heavy rain, snow, storms or high wind
What it means: A latest kit should stay connected in heavy rain, and Starlink recovers quickly after the weather improves.
- If the connection drops, wait for the weather to clear, then test again.
- If snow or ice is on the dish, gently clear it when it is safe to do so.
- If the problem continues in clear weather, carry on with the checks above.
You use a mesh system or have a large home
When: Mesh nodes, a large home, or thick walls such as concrete
- Space your mesh nodes 30 ft apart.
- In a large home or with thick walls, add mesh nodes or extenders instead of relying on the built-in router alone.
Your Starlink Mini is your main Wi-Fi
When: You use a Starlink Mini as your main Wi-Fi in a large space or where walls block the signal
- Don't use the Starlink Mini alone there: add extenders.
Your speed is lower than you expected
When: Speed tests are below what you expect from your plan
What it means: Starlink speeds are maximum available speeds: they are not guaranteed and are slower during times of congestion.
- Check your plan: Residential 100 Mbps and Residential 200 Mbps are limited to download speeds of 100 Mbps and 200 Mbps respectively.
If that does not work: If you have done every check above, including a power cycle, and a new Router to Internet test is still outside the expected range for your plan, create a support ticket: Create a Starlink support ticket. You can also do it in the Starlink app: tap Support → Messages → Contact Starlink Support. In the ticket, note the time of day, the weather and your Wi-Fi setup.
Official instructionsWhat your Starlink app alert means and what to do
Scope: Starlink kits connected to the Starlink app
Open the Starlink app, find the alert it shows, and follow the action for that alert below.
- Connect to your Starlink Wi-Fi network and open the Starlink app.
- Match the alert to a case below and follow its action. Some alerts are only advisory and don't affect your service.
- For location, moving, roaming or ocean alerts, see "Starlink stopped working away from home, abroad or at sea". For subscription, account or data alerts, see the account and data sections.
SERVICE OUTAGE
When: The app shows SERVICE OUTAGE
What it means: Starlink services or starlink.com are having an outage in your area. Starlink says it is working to resolve it quickly.
- Wait for Starlink to resolve the outage.
Starlink DISCONNECTED
When: The app shows Starlink DISCONNECTED
What it means: Your Starlink is unplugged or rebooting.
- Make sure your Starlink is completely plugged in, or wait for the reboot to finish.
- Make sure the app is looking at the right Starlink: tap "Select Starlink" or the name of your Starlink in the upper left of the app screen to switch between devices.
Starlink OBSTRUCTED or HIGH TIME OBSTRUCTION
When: The app shows Starlink OBSTRUCTED or HIGH TIME OBSTRUCTION
What it means: Something blocks part of your Starlink's view of the sky. This causes outages, most noticeable during video calls and online gaming.
- Make sure your Starlink has a completely clear view of the sky.
- Move your Starlink to a location with a clearer view of the sky, or remove the physical obstructions.
RECENT INTERRUPTIONS
When: The app shows RECENT INTERRUPTIONS
What it means: Your Starlink is online and working, but lost data recently. This may be due to extreme weather, a temporary network issue or obstructions.
- No immediate action is needed.
POOR CABLE CONNECTION
When: The app shows POOR CABLE CONNECTION
- Unplug the cables from your Starlink and the router, then plug them back in.
- Make sure the connectors are free of moisture and debris.
If that does not work: If the alert still shows, tap it in the app and follow the instructions.
SLOW ETHERNET
When: The app shows SLOW ETHERNET
What it means: Your Ethernet link is below optimal speed, which points to a cable or connection issue.
- Use a Cat5e cable or higher, with the Ethernet port set to auto-negotiate at 1000 Mbps.
- Check that all connections are fully in place.
- Connect a different device to see if the problem continues.
- Power cycle the router and unplug the connected device, wait 30 seconds, then plug them back in.
POOR WIFI SIGNAL
When: The app shows POOR WIFI SIGNAL
- Move closer to your router.
WIFI CONFIGURATION REQUIRED
When: The app shows WIFI CONFIGURATION REQUIRED
- Tap the alert to set up Starlink Wi-Fi and restore internet access.
DETERMINING LOCATION
When: The app shows DETERMINING LOCATION
What it means: Your Starlink is looking for a GPS signal. This can take up to 15 minutes.
- Don't unplug your Starlink during this time.
- Don't place the dish directly on metal or use a third-party metal mount wrapped around its base: these can affect GPS and are not supported.
UPDATE REQUIRED
When: The app shows UPDATE REQUIRED
What it means: Your Starlink downloads the latest software within 24 hours. If the download finishes before 3am, it reboots automatically to apply the update.
- Keep your Starlink powered with a clear view of the sky so it can download the update.
- To update straight away, start the update from the app once the download completes.
UNSUPPORTED SOFTWARE VERSION
When: The app shows UNSUPPORTED SOFTWARE VERSION
What it means: Your Starlink downloads the latest software over the air and reboots to install it.
- Make sure your Starlink has a clear view of the sky to receive the update.
MANUAL UPDATE REQUIRED or SOFTWARE OUTDATED
When: The app shows MANUAL UPDATE REQUIRED, or SOFTWARE OUTDATED (software too old to connect to satellites)
What it means: Your Starlink needs a manual software update (sideload) to get back online.
- Update the Starlink app to the latest version.
- Plug your Starlink in outdoors.
- Connect your phone to the Starlink Wi-Fi network and open the app.
- Tap Start Sideload when prompted. Or tap the menu button (three lines), tap the circled "i", scroll to Debug Data > Sideload and tap Update Now.
- Wait: the update usually takes less than 15 minutes. If it doesn't complete, try once more.
- For other setups, see Starlink Sideloading.
If that does not work: If the sideload option doesn't appear or the update still fails, contact Starlink Support for replacement options.
POP CHANGE
When: The app shows POP CHANGE
What it means: Your Starlink point of presence changed, giving you a new IP address.
- Reboot your Starlink or your third-party equipment to get back online.
If that does not work: If the alert persists and performance is affected for more than 30 minutes, contact Starlink Support.
Starlink OVERHEATED, THERMAL SHUTDOWN or THERMAL THROTTLING
When: The app shows one of these heat alerts for your Starlink
What it means: Your Starlink has stopped or slowed down to cool off. It reconnects once it has cooled down.
- Let your Starlink cool down.
- Install it in a well-ventilated location, away from direct sunlight and other heat sources.
- If possible, move it to a cooler location.
POWER SUPPLY THERMAL THROTTLING
When: The app shows POWER SUPPLY THERMAL THROTTLING
What it means: The power supply is too hot, so your Starlink reduces its power draw.
- Put the power supply in a well-ventilated location, away from heat sources.
If that does not work: If it continues, move the power supply to a cooler area and power cycle your Starlink system.
POWER DISCONNECT DETECTED
When: The app keeps showing POWER DISCONNECT DETECTED
- Check the power source of the power supply, and make sure all cable connections to the power supply and your Starlink are secure.
Starlink ROUTER HARDWARE ISSUE
When: The app shows Starlink ROUTER HARDWARE ISSUE
What it means: There appears to be a problem with the Ethernet ports on your Starlink Router.
- Contact Starlink Support for replacement options.
Official instructionsStarlink stopped working away from home, abroad or at sea
Scope: Starlink Residential and Roam plans
Move your Starlink back to where your plan allows it, or change your address or plan, depending on the alert in the Starlink app.
- Open the Starlink app and check which alert it shows.
- Follow the case below that matches the alert.
DISABLED TOO FAR FROM SERVICE ADDRESS
When: You are on a Residential plan and your Starlink is too far from its registered service address
What it means: Residential service is designed for use at your registered service address, so your service has been restricted.
- Return to your registered service address. Service should resume automatically.
- If you have moved permanently, update your service address.
- If you want to use Starlink away from home, switch to a Roam plan.
Starlink MOVING TOO FAST, Starlink DISABLED WHILE MOVING or DISABLED MOVING TOO FAST
When: Your Starlink is moving faster than your plan allows
What it means: Residential plans are for stationary use only at fixed, registered addresses. Roam supports in-motion use up to 100 mph (160 km/h).
- Reduce your speed below the limit for your plan.
- On a Residential plan, return to your registered service address.
- To use Starlink while moving, you need a Roam or Priority service, or a plan that supports higher speeds.
- More details: Starlink in-motion use.
ROAMING PERIOD EXPIRED or DISABLED ROAM RESTRICTED
When: Your Starlink has been outside its registered country for too long
- Return to the registered country address on your account, or update your registered address to your new location.
- If the alert is DISABLED ROAM RESTRICTED, move your Starlink to its home country and keep it powered on and active for at least 24 hours to resume service.
UNEXPECTED LOCATION or DISABLED BLOCKED COUNTRY
When: Your Starlink is not in its registered country or location, or is in a country where service is restricted or unavailable
- Not in your registered country: move your Starlink back there, or change to an appropriate service plan.
- Not at your registered location: update your service address, or change your service plan to use Starlink away from that location.
- Service not available in this country: move your Starlink back to its registered country, or to a country where Starlink is available. Service resumes automatically.
- Check where Starlink is available on the Starlink availability map.
DISABLED NO SERVICE IN OCEAN
When: Your Starlink is at sea, or the app says service is not available in the ocean
What it means: Residential service is for a fixed, land-based location and does not work at sea. Roam covers some coastal waters with day limits; see the exact rules on Starlink app alerts (official page).
- On Roam Unlimited: enable Ocean Mode (billed per GB).
- On Roam 50GB or Roam 100GB: first upgrade to Roam Unlimited, then enable Ocean Mode.
- Or move your Starlink back to land or within 12 nautical miles of shore. Service should resume automatically once you're back within supported coverage.
- Another option is a Starlink Maritime product.
DISABLED CELL IS DISABLED
When: Your Starlink is in an area that does not receive service
- Move your Starlink to an area with active Starlink coverage.
DISABLED UNKNOWN LOCATION
When: Starlink cannot determine your location accurately
- Make sure your service address is set correctly in your Starlink account.
- Check that your Starlink is in a supported service area.
If that does not work: If the problem continues, contact Starlink Support.
Account, plan and data
Official instructionsStarlink says no active subscription or account disabled
Scope: Starlink kits and Starlink accounts
Activate, resume or complete registration for your Starlink service, depending on the alert in the Starlink app.
- Open the Starlink app and check which alert it shows.
ACTIVATE Starlink NOW
When: Your new Starlink is online but not activated yet
What it means: Your Starlink is in its free-data grace period of up to 60 minutes. Service is cut off if it is not activated in time.
- Activate your Starlink now to keep your service.
NO ACTIVE SUBSCRIPTION
When: Your Starlink is not linked to an active account
- Activate or resume your Starlink service.
DISABLED ACCOUNT DISABLED
When: The app says your account is disabled
What it means: Your subscription may be inactive, or your service may be disabled until a required registration is complete.
- Check your account status and make sure your subscription is active.
- Go to Account > Settings > Registration Requirements.
- Complete and submit the requested information.
- Restart your Starlink. Service should resume shortly after you submit.
If that does not work: If your subscription is active and no registration is pending, contact Starlink Support.
DISABLED NO ACTIVE SERVICE LINE
When: Your Starlink has no active service line
- Check your account status and make sure your service plan is active.
If that does not work: If needed, contact Starlink Support.
Official instructionsStarlink data limit reached or speed limited
Scope: Starlink plans with a data limit or priority data
Add data, change your plan or turn on automatic top-up, depending on the data alert in the Starlink app.
- Open the Starlink app and check which alert it shows.
DATA USAGE LIMIT REACHED
When: Your service is off because you reached your data limit
- Add data or change your plan to restore internet access.
DATA OVERAGE RATE LIMITED
When: Your speed is limited because you are out of priority data
- Add more data by topping up, or turn on automatic top-up.
DISABLED DATA USAGE EXCEEDED QUOTA
When: Your service is restricted because you exceeded your data quota
- Opt into additional data if your plan supports it.
OPTED INTO PRIORITY DATA
When: You have opted in to overage data
- Tap the alert to view and manage your data usage.
Official support optionYou can't access your Starlink account
Scope: Starlink online account
If you can't access your Starlink account, or don't have one, send a request to Starlink Support through its request form.
- Open the Starlink request form (no account or can't access your account) and submit your request.
About
Starlink provides broadband internet through a satellite constellation in 160+ countries, territories and other markets. It offers home internet plans and Roam plans for travel, camping, boating and more.
Still not working? Report it
If none of the help above fixed it, tell others: your report helps them see that Starlink is having a problem.
Where this status comes from
- The verdict comes from user reports, counted above a small threshold. The check of the official website (starlink.com) is shown for information and does not change the verdict. An incident announced on the official status page can mark an outage as confirmed.
Contact options
Contact Starlink Support
- Create a support ticket here.Create a Starlink support ticketStarlink Support is available 24/7
- Unable to access or without an account: Submit a request hereStarlink request form (no account or can't access your account)
- Call Starlink Support (US/Canada)+1 888-467-8275 (888-GO-Starlink)24/7English
- Local Phone SupportStarlink local phone numbers by countryUse the number for your country or region
Still having trouble with Starlink? Add your report: it helps others see whether it is down.
User comments
No comments yet. Be the first!
Share your experience with Starlink
Leave a comment on Starlink
0/1000
Comments are published right away if they pass an automatic filter (insults, links and spam are hidden). Report illegal content.